Tooth Profile & Pitch Profile of Timing Belts.

-
Good Evening Everyone.....!!!

Today's topic for discussion is ''Tooth Profile & Pitch sizes with application''. So let's start with Tooth Profiles of Timing Belts.

Tooth Profiles:-

There are two types of tooth profiles in Timing Belts--

1. Trapezoidal Tooth Profile
2. Curvilinear Tooth Profile

Trapezoidal Profile:-

  

























                          Curvilinear Tooth Profile:-


























Types of Pitches:-

1. Imperial Pitch (Measured in Inches)
2. Metric Pitch (Measured in Mm)



Imperial Pitch Profile(Trapezoidal Tooth Profile):-











 
Metric Pitch Profile(Trapezoidal Tooth Profile):-












For more deatils as per application click on mentioned link.


Thanks & Have a great Eve.......!!!





Comments

Post a Comment

Popular posts from this blog

Introduction : Movex Zero Contact Modular Belt

-
Good Evening Everyone...!!! Today we are here with new modular belt ''Zero Contact''. Here we are going to discuss about it's Design, Features & Applications with a live demonstration. Let's start with it's Designing .... Zero contact is available in different widths with a closed top surface. Polyamide material is used in  construction as well screws & nuts are made of stainless steel & zinc plated steel. Features: 1. Speed upto 70 meters per minute. 2. Maximum working load 13500 N/m (belt width) 3. Minimum width available :- 200 mm 4. Maximum width available :- 1000 mm 5. Open Area :-0% 6. Rm at first sprocket: 650mm-to-1450mm 7. Constant inner radius & reduced pitch. 8. Less floor space required.  Area of Application: Packaging Industry: It's capable of handling a variety of packages sizes, types and configurations including delicate products exiting a shrink wrapper.
Read more

CXP Vs CXA Heavy Duty Drive Belt

-
Image
Hello Everyone.....!!! Today we shall share the difference between Conti CXP & CXA Timing Belt. CXP & CXA Rubber Belt Properties: Oil resistant to a degree Tropics resistant UV and ozone Electrically conductive (Anti-static) to ISO9563 Temperatures ranging from -20°C to +100°C Increased power ratings CXP heavy-duty, high speed drive belt The CXP range has a specifically developed tension member and exceptional material bonding. The teeth and the belt top are made from a synthetic Rubber mix with high tear resistance and enhanced shear resistance, to ensure reliable sustained power transmission at belt speeds up to 50m/s. The CXP range is used where high power must be transmitted above 1000RPM. Glass Fibre Tension Member These tensile members have a high flexural fatigue strength along with a highly reliable power transmission capability up to 50m/s. CXA heavy-duty, low speed drive belt The CXA range combines exceptionally hig
Read more

Max Schlatterer Esband

-
Image
                                                   Good Evening Everyone,  Today we are here with a new topic ''Vacuum Belts'' mainly used in Packing Industry. The brand we are going to discuss is  Max Schlatterer Esband. Esband Vacuum Belts The vacuum belts (trigger belts) are mainly used in vertical forming, filling and sealing machines, so-called tubular bag machines. The basis of these vacuum toothed belts for tublar baged machines is always an endless toothed belt with a winding nose on the back of the toothed belt. This is coated in the special Esband endless process and has much above-average reliability. Due to closely set manufacturing tolerances, Esband vacuum extraction belts, for example achieve optimum friction coefficients and  convince with great consistency at  high cycle rates. Specific Properties: • High functional reliability due to high, constant coefficient of friction. • Long service life due to very good abrasion resista
Read more